GYEON Q²M WetCoat Wet Sealant 1000ml

Sealing straight off the wash – GYEON Q²M WetCoat as a wet sealant

What is a wet sealant, and what makes GYEON Q²M WetCoat so special?
A wet sealant goes straight onto wet paint – no drying, no buffing, no waiting around. GYEON Q²M WetCoat carries SiO₂ particles that settle onto the paint as you rinse and lay down a thin, hydrophobic protective film. The result: water beads off right away, the paint pops, and the layer holds for several weeks. For a SiO₂ sealant after the wash in under two minutes, WetCoat is one of the most efficient options in detailing.

Not every sealant needs hours of polishing and curing. GYEON Q²M WetCoat proves the opposite: after the wash you spray it onto wet paint, give it a quick rinse, and you're done – a SiO₂ protective layer that makes water bead, lifts the gloss and holds for several weeks. No buffing off, no timer to watch, no fiddly application. WetCoat is the wet-sealant pick for anyone who wants maximum protection with minimal effort – and no compromise on the result.

• Goes straight onto wet paint: you spray WetCoat on after the final rinse – trapping the product in the water film spreads it evenly and grips well, with no manual application.
• SiO₂ protection in minutes: the SiO₂ particles settle onto the paint as you rinse and form a hydrophobic layer right away – you'll see the beading and the gloss the moment it dries.
• Holds for several weeks: quick as it is, WetCoat holds 4 to 8 weeks under normal conditions – well beyond what a fast detailer spray gives you.

Daniel's tip from the shop: get the most out of WetCoat on the final rinse – spray it onto the wet paint, let it sit for 20–30 seconds, then rinse it off with low pressure and plenty of water – don't wipe it. The even rinse spreads the SiO₂ particles nicely across the whole panel. Then dry with a clean microfibre or an air blower – you'll see the result straight away.

How WetCoat works

The chemistry behind WetCoat is elegant: SiO₂ nanoparticles suspended in a water-based carrier. Spray the product onto wet paint, then rinse it off with plenty of water, and the nanoparticles leave a thin, even layer on the surface. That layer is hydrophobic – water beads up and runs off instead of spreading out and leaving water spots behind.

The key to it all is the rinse: too little water and you get streaks and spots, too much and you wash off too much product. The sweet spot – an even rinse with a wide, low-pressure stream – gives the SiO₂ particles the chance to spread out properly across the surface.

WetCoat as part of your regular wash routine

What's clever about WetCoat is that it slots straight into your wash routine without dragging it out. After a regular wash – whether with GYEON Q²M RestartWash or a standard shampoo – you put WetCoat on at the final rinse. Total time for the seal: 1 to 2 minutes. That makes WetCoat the perfect maintenance product for cars already protected with a long-term coating – a regular top-up after every wash.

But even on cars without a base coating, WetCoat delivers solid protection on its own: better than no protection, far quicker than any other sealing product, and with a visible effect that wins you over straight away. For customers who don't want a full coating job but want more than nothing, WetCoat is the ideal call.

Compatibility with existing coatings

WetCoat plays nicely with all the usual coatings and sealants – it works as a top layer and freshens up the hydrophobic behaviour of the base sealant without damaging or changing it. On a cured SiO₂ coating, WetCoat boosts the hydrophobics and noticeably extends how long the base seal performs.

For cars sealed with a GYEON Q² Coat or similar ceramic coating, WetCoat is a great fit as regular maintenance after every wash. The SiO₂ particles in WetCoat fill the micro-gaps in the coating surface and give the paint a fresh, water-shedding effect after every wash.

The result: more than you'd expect from a wet sealant

What sets WetCoat apart from other fast sealing products is the effort-to-result ratio: under two minutes of extra work after the wash, but a result you measure in weeks. The gloss shows up right away, the hydrophobics make themselves known at the next rain, and the surface is far easier to keep clean.

For cars that get washed regularly – weekly or every other week – WetCoat is the missing piece for lasting, well-kept paint. Paired with GYEON Q²M QuickDetailer for quick touch-ups in between and GYEON Q²M RestartWash for the decontamination wash, WetCoat rounds out a complete, everyday care system for the demanding car owner.

WetCoat for pros and DIY

In professional detailing, WetCoat works as a handover finish: after the full prep and the dry-down, you put WetCoat on during the final rinse phase – the customer gets a car that's freshly washed and freshly sealed at once. For the DIY crowd, WetCoat is the easiest way to actively put work into your paint after every wash, with no expert know-how or complex kit.

For a lot of people the way into the GYEON range starts with WetCoat – and it shows straight away what quality detailing chemistry can do. If you want to take the next step, GYEON Q²M Preserve for plastics and GYEON Q²M TireExpress for tyres are natural add-ons that round out the whole picture.