ZviZZer Paint Ceramic Coat Ceramic Coating 50ml

Lock in your paint hard for two years and beyond

What is the ZviZZer Paint Ceramic Coat? A SiO2 ceramic coating that cures into the clear coat as a hard silicon-polymer film, lasts 30 to 36 months and throws water off hard. It's not a polish and won't remove scratches — it seals prepped, degreased paint.

ZviZZer Paint Ceramic Coat is a SiO2-based ceramic coating from ZviZZer, a hybrid silicon-polymer film for long-term paint protection. As it cures it cross-links with the clear coat into a hard, slick anti-stick layer that beads water, lifts the depth of gloss and shields the paint from oxidation, road salt, acids and bugs. The catch: the paint has to be clean, decontaminated and degreased.

• 30 to 36 months of protection from a single layer. Depending on use and care, the coating holds for roughly 30 to 36 months or about 30,000 kilometres, carrying you through several winters where road salt and acids would otherwise hit the clear coat head-on. One layer is all it takes for full protection.
• Clear coat around 60 to 65 percent harder against scratches. Once cured, you get a hard surface that makes the clear coat about 60 to 65 percent more scratch-resistant than stock. Fine wash marks have a much harder time settling in, and the chemical resistance runs across the pH 3 to 12 range.
• 50 millilitres cover a whole car. The 50 ml bottle covers a full mid-size body — you only need 10 to 15 drops per section. The applicator block and white application cloth come with the set in the box, so you start without buying anything extra.

Day-to-day from Detailing1: What we see day-to-day: the most expensive mistake with a ceramic coating happens before you even lay it down. Skip degreasing the paint with isopropanol and you seal in wax and polish residue, so the coating only half bonds. Timing matters just as much — leave the Paint Ceramic Coat sitting longer than three minutes and high spots cure in that barely come off. On a freshly polished bonnet we buffed it off section by section after 1 to 3 minutes.

Lay it on thin and crosswise, buff off after minutes

Put 10 to 15 drops of Paint Ceramic Coat on the dressed applicator and pull it across each 40-by-40-centimetre section thin and crosswise, until the area is evenly wetted.

It all hinges on prepped paint: washed, clayed and degreased with isopropanol. On unpolished paint the coating locks swirls in for good, so you correct any defects first with the one-step polish. Run the applicator block with a fresh application cloth in calm, overlapping passes.

After 1 to 3 minutes the film goes matte and shows high spots. Now you buff the excess off streak-free with a clean, dry microfibre cloth and check it in raking light. Never work in direct sun, and keep the car away from rain and washing for the first 24 hours, or you'll throw off the cure.

It seals the paint but doesn't polish it

The Paint Ceramic Coat protects the paint, it doesn't improve it — it won't remove scratches or oxidation and locks in exactly the condition the paint is in when you apply it.

Its home turf is long-term protection: freshly reconditioned paint that needs to keep its gloss and slickness for years. Against road salt, acid rain, bird droppings and UV it forms a hard barrier and bumps scratch resistance up by around 60 to 65 percent.

What it doesn't do deserves to be said just as plainly. It won't stop a stone chip on the motorway — no coating of this thin a film will. And if there's existing wax on the paint, the Paint Ceramic Coat won't strip it; you have to wash it off and pull it with isopropanol first.

If the paint is dull or scratched, it needs a polish and a second degrease beforehand, or you lock the damage in for good. What we see day-to-day: a coating almost never fails on the product, but on a half-prepped surface that ends up beading patchy later on.

For anyone who wants to protect it properly, once

The Paint Ceramic Coat pays off when you want hard protection after a thorough recondition that holds for two to three years, instead of topping up with wax every few months. A single 50 ml set covers the whole car.

It's less suited to anyone who just wants to freshen up a bit of gloss quickly and without prep, because without degreasing and a clean base you throw the durability away. For that case a quick spray sealant is the more honest route; for lasting protection, the ceramic.

That leaves the choice between the two ZviZZer coatings. If you want maximum hardness, the strongest hydrophobicity and the longest durability of 42 to 48 months, you go for the graphene-reinforced Graphene Ceramic Coat. If you're after balanced, classic ceramic protection with depth of gloss, the ZviZZer Paint Ceramic Coat is the right pick. The difference no spec sheet flags up is on you: durability isn't decided by the coating, but by the half hour of degreasing beforehand that most people skip.

Applying ZviZZer Paint Ceramic Coat

From degreased paint to a hard ceramic layer

Before applying the coating, the paint must be impeccably clean: washed, decontaminated with clay, and degreased with isopropyl alcohol. If any wax, oil, or polish residue remains on the surface, the ceramic will not adhere properly and will later bead unevenly.

If there are swirls or dull spots in the paint, correct them beforehand with the One-Step Polish and then wipe down again with isopropyl alcohol. Next, apply 10 to 15 drops of Paint Ceramic Coat to the applicator block wrapped in an application cloth and work it in thinly in a cross-hatch pattern over each 40-by-40-centimeter section.

After 1 to 3 minutes, the film will turn matte and show high spots. Now, buff off the excess with a clean, dry microfiber cloth until streak-free and check under glancing light. Work section by section; never do the entire half at once, otherwise the areas coated first will harden.

Notes: Paint Ceramic Coat seals the paint; it does not polish it, so defects must be corrected beforehand. Never work in direct sunlight, and protect the vehicle from rain and washing for the first 24 hours so that the coating can cure undisturbed. Wear protective gloves and work in a well-ventilated area during application. Store in a cool, frost-free place and close the bottle tightly immediately after use, as the ceramic reacts with humidity.