SONAX PROFILINE Microfiber Drying Towel "PLUS" Microfiber Cloth

Scratch-Free Drying in Professional Format — SONAX PROFILINE Microfiber Drying Towel "PLUS"

What distinguishes a professional drying towel from ordinary microfiber towels? The SONAX professional drying towel combines high absorbency with a soft, scratch-resistant surface — for quick, streak-free drying without water marks on paintwork and glass.

Drying after a car wash is the moment when many scratches occur — not during the wash itself. Hard fibers, insufficient absorbency, or incorrect material can rub dirt particles over the freshly washed paintwork, leaving behind fine holograms or swirl marks. The SONAX PROFILINE Microfiber Drying Towel "PLUS" is specially designed for this critical step: a highly absorbent microfiber structure absorbs wash water over a large area, eliminating the need to pass the towel over the same spot multiple times.

• High absorbency — large-area drying with few passes. The PLUS quality of the drying towel lies in its fiber density and layer structure: the microfibers are woven so densely that they not only absorb water on the surface but also transport it deep into the towel. This significantly reduces the water film on the paintwork with each pass and allows a vehicle to be dried completely with significantly fewer passes than with thin standard towels.
• Soft microfibers for scratch-free use on paint and glass. The fibers of the PROFILINE drying towel are designed for minimal mechanical stress on the paint surface. Hard material or coarsely woven fibers act like sandpaper on wet paint — fine abrasive marks, only visible in sunlight, are the result. The soft PROFILINE fibers glide over the surface and absorb water without creating particle pressure on the paint.
• Available individually and as professional packs of 24 and 50 pieces. The drying towel is available individually for private drivers, as well as in 24-piece and 50-piece packs for detailing businesses and car washes. The professional packs ensure a continuous supply for commercial use, where many vehicles are dried daily and a stock of fresh, clean towels is essential.

The quality of a drying towel only becomes apparent after the second and third use: cheap microfiber towels lose their absorbency after a few washes because the fibers become clogged with detergent residue or shrink due to incorrect washing temperatures. The PROFILINE drying towel is designed for long-lasting usability — the fiber structure retains its absorbency over many washes if the towel is treated according to the care instructions. This makes the initially higher price compared to cheap products economical, because the towels do not have to be replaced after a few weeks.

Practical tip from Detailing1: When drying, the "pat-and-drag" technique is recommended: the drying towel is placed, lightly pressed, and then pulled flat over the surface — instead of being pressed and rubbed. This allows the towel's absorbency to work without rubbing dirt particles into the paint. For maximum efficiency, the Microfiber Drying Towel "PLUS" can also be used folded in half — a larger contact area increases water absorption per pass. After use, wash the towel at a maximum of 40°C without fabric softener — fabric softener clogs the microfiber pores and permanently destroys the absorbent effect.

Microfiber Technology of the SONAX PROFILINE Microfiber Drying Towel "PLUS" — Structure and Absorbency

The SONAX PROFILINE Microfiber Drying Towel "PLUS" uses a multi-layered microfiber structure that works on the principle of capillary action: fine fibers create a dense capillary network that actively transports water from the contact area deep into the towel. Unlike single-layer microfiber towels, where the outer layer quickly saturates and water remains on the paint, the PLUS towel creates continuous absorption capacity over its entire lifespan.

The fiber strength is optimized for drying delicate paint surfaces. Microfibers are produced in various strengths — thinner fibers with more fibers per unit area are softer but more absorbent; thicker fibers are more robust but rougher. The PROFILINE drying towel strikes a balance between both properties: sufficient fiber softness for scratch-free contact with polished surfaces and sufficient fiber density for high absorbency per wiping pass.

The size of the drying towel is designed for quick drying of an entire vehicle panel — hood, roof, door — in one or two passes. A towel that is too small requires frequent refolding and thus more wiping motions overall, which increases the risk of scratching. The PROFILINE PLUS format enables large-area work with few passes, saving time and protecting the paint.

The durability of the microfiber structure largely depends on its care. Washing without fabric softener at a maximum of 40°C is the most important rule: fabric softener forms a film over the microfibers and permanently reduces their absorbency. Machine drying at low temperatures or air drying preserves the fiber structure better than high-temperature drying, which can melt the fibers together due to heat. When properly cared for, the PLUS towel retains its absorbency over many dozens of washes.

An important quality feature of PROFILINE microfiber towels is the testing for impurities and dyes. Cheap microfiber towels can contain dye residues from production that bleed onto wet paint during the first use and leave stains. SONAX uses tested microfiber materials in the PROFILINE line that are free of harmful residues — an important aspect when the towel is used on freshly sealed or polished surfaces.

Application of the Microfiber Drying Towel — Technique and Workflow after Washing

Correct drying technique distinguishes professional detailing from everyday washing. When drying professionally, one starts with the highest surfaces (roof, hood) and works downwards — this allows residual water to drain downwards, where it is absorbed last. Sills and door sills, where water collects, are treated last, as they require more pressure and absorption work.

The most important rule when drying with a microfiber towel: place the towel, do not rub it. Overly aggressive wiping increases the pressure of the towel on the paint and acts like a gentle abrasive process, especially if sand particles or brake dust have not been completely washed off. The large-area laying technique of the PROFILINE PLUS towel uses the towel's own weight and capillary action for water absorption — without pressure and friction.

When used in detailing operations, a clearly defined towel rotation system applies: each freshly used towel is replaced after one vehicle, if visibly soiled. Slightly damp towels can be used on several vehicles, as long as they have not picked up dirt particles. The 24-piece and 50-piece packs of the PROFILINE drying towel enable this rotation without interrupting the workflow — enough spare towels for an entire working day with multiple vehicles.

For use on freshly sealed or waxed vehicles, particularly gentle handling is recommended: the drying towel should only be used with minimal pressure on fresh sealants, as the sealant can be sensitive to mechanical pressure during the initial curing phase. In this case, a blast dryer process (compressed air or blower) is recommended before the towel drying step to remove most of the water film without using a towel.

Application Areas of the PROFILINE Drying Towel — Private, Workshop, and Commercial Use

The PROFILINE drying towel covers a wide range of application scenarios. For private drivers who regularly wash their vehicle by hand, the single piece is the ideal format — durable enough for the entire vehicle lifespan, if properly cared for. One to two drying towels in the household completely cover normal needs.

For detailing enthusiasts who work on multiple vehicles or perform more complex detailing, the 24-piece pack is recommended. With a dozen fresh towels, an entire vehicle can be dried without contacting the same spot twice with the same towel — maximum scratch prevention through consistent towel rotation. The remaining towels are available for glass and interior cleaning tasks, where the SONAX PROFILINE Microfiber Cloth "Glass" is the specialized counterpart for streak-free window and glass surface cleaning.

In commercial use — car detailing, vehicle care in car dealerships, mobile detailing services — the 50-piece pack is the most economical unit. The price per towel in bulk packages is significantly lower compared to individual purchase, and the quantity allows for several days of use without intermediate washing. For businesses that process many vehicles daily, a well-structured towel inventory is an essential factor for efficiency and quality assurance.

In addition to drying body surfaces, the drying towel is also suitable for wheels, windows, and chrome parts — wherever water needs to be removed without leaving residues. On wheels that are rinsed after wheel cleaning, an absorbent drying towel is useful to prevent water spots on the wheel spokes. A separate towel for this area — not the same as for the paint — prevents the transfer of brake dust or cleaning agent residues to the painted surfaces.

Microfiber Drying Towel "PLUS" in Comparison — SONAX PROFILINE Microfiber Towels

In the SONAX PROFILINE microfiber assortment, the PROFILINE drying towel has a specific role: it is the drying towel — optimized for maximum absorbency and large surfaces. The SONAX PROFILINE Microfiber Cloth "Soft Touch" is designed for polishing work — softer, but less absorbent, ideal for removing polishes and waxes. The PROFILINE Microfiber Cloth "Glass" is optimized for smoothness and streak-free results on glass surfaces. Each towel has its defined area of application — and the PLUS drying towel fulfills the most important one: quick, scratch-free drying after washing.

Compared to chamois leathers or synthetic window wipers, the microfiber towel offers decisive advantages: it is washable, durable, less prone to scratching, and does not release dyes or chemical residues. Chamois leather requires regular moisturizing care and can harden if stored incorrectly, then causing scratches. The PROFILINE PLUS drying towel combines absorbency, size, and softness in a format designed for professional results.

For the SONAX PROFILINE Coating Towel, there is a clearly separate area of application: the Coating Towel is exclusively intended for removing and distributing ceramic coatings and should not be used as a general drying towel to avoid contamination of the coating fibers. The PLUS drying towel and the Coating Towel complement each other in professional detailing — each for its specific process step.

Buying the SONAX PROFILINE Microfiber Drying Towel "PLUS" — Format, Quantity, and Usage Planning

The PROFILINE drying towel is available in three formats: single piece, 24-piece pack, and 50-piece pack. The choice of the correct format depends on the volume of use: private drivers choose the single piece, detailing enthusiasts the 24-pack, commercial businesses the 50-pack.

Those who are just starting out with professional microfiber use can begin with the single piece and evaluate the quality in their own use before purchasing a larger pack. The durability of the PLUS towel also makes individual purchase economical for occasional users — a well-maintained drying towel lasts for several vehicle years. For businesses with regular needs, the 50-pack is the most economical option with the lowest price per towel.

The SONAX PROFILINE Microfiber System offers the right towel for every task: the PLUS drying towel for the drying phase, the "Glass" towel for windows and mirrors, the "Soft Touch" towel for polishing and sealant removal, and the Coating Towel for ceramic coatings. Anyone who has all four towels in a set is fully equipped for professional detailing — without compromising on material selection and without the risk of using the wrong towel in the wrong place.