{"title":"Washing — XTREME by SONAX","description":"\u003ch2\u003eCar care starts with the right wash — XTREME Car Shampoo by SONAX\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eThe SONAX \u003cstrong\u003eXTREME Car Shampoo\u003c\/strong\u003e range includes six specialized washing products for every application — from dense pre-wash foam and ceramic-active shampoo to sealing combi-preparations. The right wash is the first and most important step in car care.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eEvery car care routine begins with washing — and it is precisely here that it is decided whether the rest of the care process makes sense at all. Many detailers invest a lot of time and money in high-quality sealants, polishes, and care products, but neglect the foundation: regular, gentle washing with the right shampoo. This is a mistake that always takes its toll in the long run — either through increasingly dull paint, prematurely diminishing protective layers, or fine scratches that accumulate with every wash. Those who wash with a bad shampoo or the wrong technique risk micro-scratches, gradually washing away existing sealants, and laying a poor foundation for all subsequent steps. This is not a detail, but the actual foundation of effective car care. The SONAX \u003cstrong\u003eXTREME Car Shampoo\u003c\/strong\u003e range solves this problem with a differentiated product palette: six formulas, each developed for a specific application, all compatible with modern ceramic and polymer sealants. Whether you work with a foam lance, the classic bucket, or a combi-preparation that also seals — the XTREME shampoos deliver the right result without jeopardizing existing protection.\u003c\/p\u003e\n\n\u003cp\u003eWhat distinguishes these shampoos from ordinary supermarket products is not just the ingredients, but the product philosophy behind them. In a supermarket, you buy an all-purpose shampoo that may be cheap but was not designed for the modern detailer's demands. It usually contains surfactants that dissolve everything — including wax and sealant. The first time, you hardly notice a difference. After ten washes, the lotus effect is gone, and you wonder why the expensive quick-detailer suddenly no longer works. The answer lies in the wrong shampoo. The XTREME shampoos, on the other hand, are formulated from the ground up to work with sealant chemistry instead of against it — coating-compatible, gentle, and in some cases even actively building up. Conventional car shampoos are often aggressive in their surfactant formulation: they clean thoroughly, but they also wash off the painstakingly applied sealant. After three to five washes, a wax sealant is usually completely gone, a cheap polymer coating hardly better. The XTREME shampoos, on the other hand, are formulated to work with sealant chemistry instead of against it — coating-compatible, gentle, and in some cases even actively building up.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompletely sealant-compatible.\u003c\/strong\u003e All XTREME shampoos are designed to preserve existing ceramic and polymer protective layers. This is particularly important if you have invested in a high-quality spray sealant or a ceramic coating. This investment should not be slowly undone during washing. The \u003ca href=\"\/en\/products\/sonax-xtreme-ceramic-activeshampoo-autoshampoo\"\u003eXTREME Ceramic Active-Shampoo\u003c\/a\u003e goes even further and actively strengthens the sealant with every application.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHighly concentrated and permanently economical.\u003c\/strong\u003e The XTREME shampoos are designed for economical consumption. The \u003ca href=\"\/en\/products\/sonax-xtreme-shampoo-2-in-1-autoshampoo\"\u003eShampoo \"2 in 1\"\u003c\/a\u003e can be diluted up to 1:500 — one liter of concentrate thus suffices for an impressive number of washes. This not only makes the products cost-effective in continuous operation but also environmentally friendly, as less chemicals are used per wash.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecialized formulas for every need.\u003c\/strong\u003e Foam lance, bucket wash, sealing during washing, combination wash, or direct protection build-up in one step — the XTREME Washing range has the right solution for each of these cases. No shampoo is supposed to do everything, but each performs its core task exceptionally well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For the first wash after a new coating or fresh sealant, use only the \u003ca href=\"\/en\/products\/sonax-xtreme-ceramic-activeshampoo-autoshampoo\"\u003eXTREME Ceramic Active-Shampoo\u003c\/a\u003e — it solidifies the not yet fully cured protective layer instead of stressing or washing it off. After a ceramic sealant, wait at least 24 hours before the first wash, and avoid high-pressure cleaners directly on freshly treated surfaces during the first few days. This way, you get the maximum durability from your sealant.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eXTREME Rich-Foam and FoamGiant — maximum foam for foam lances and pre-wash\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-xtreme-richfoam-shampoo-autoshampoo\"\u003eXTREME Rich-Foam Shampoo\u003c\/a\u003e is the classic for anyone working with a foam lance or foam cannon. The formula is optimized for dense, stable foam: this means specifically that the foam adheres to the vertical bodywork long enough after spraying to fully develop its chemical effect. Dirt and road dust are enveloped during this time, chemically dissolved from the paint surface, and safely removed during the final rinse. This prevents the dreaded dry wiping — i.e., contact of the wash mitt with still adhering dirt — and thus the micro-scratches that almost always occur with poor technique or insufficient pre-wetting. Good washing chemistry and the right technique work hand in hand here: the lance creates the conditions, the shampoo does the main work.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-xtreme-foamgiant-shampoo-autoshampoo\"\u003eXTREME FoamGiant Shampoo\u003c\/a\u003e is the consistent further development of this philosophy: even more foam, even longer stable on the surface, with a formula optimized for maximum contact time with dirt. The FoamGiant is particularly recommended for vehicles with heavy or stubborn dirt — heavy burn-ins from road traffic, tar splashes from fresh paving, or vehicles that have not been washed for a long time and accordingly have adhering deposits. The dense foam adheres, works, and can then be rinsed off without residue. As a special product, there is also the \u003ca href=\"\/en\/products\/sonax-xtreme-foaminvasion-shampoo-sonderedition\"\u003eXTREME Foam-Invasion special edition\u003c\/a\u003e, which was specially developed for lance fans and produces a particularly spectacular, dense foam image — ideal for car-meet washes or for anyone who particularly appreciates the visual experience of foaming.\u003c\/p\u003e\n\n\u003cp\u003eBoth shampoos are prepared in the foam lance with a few milliliters of concentrate — the exact dosage varies depending on the lance manufacturer and desired foam density; typical approaches are between 50 and 100 ml per 500 ml of water in the lance container. After foaming and an exposure time of about three to five minutes, rinse with clear water, then the actual hand wash with the bucket system. Both products are coating-compatible, do not remove existing sealants, and leave no residue on the paint after drying.\u003c\/p\u003e\n\n\u003ch3\u003eXTREME Ceramic Active-Shampoo — wash and build up ceramic protection simultaneously\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-xtreme-ceramic-activeshampoo-autoshampoo\"\u003eXTREME Ceramic Active-Shampoo\u003c\/a\u003e is the most technologically advanced product in the washing range. The formula contains active ceramic polymers that penetrate the micro-pores of the paint during washing and build up and strengthen a thin, durable ceramic protective layer there. This means: every wash with this shampoo is also an active refreshment of the ceramic sealant — without a separate sealing step, without a polishing machine, without additional time or material effort. The wash itself becomes a care step.\u003c\/p\u003e\n\n\u003cp\u003eThe lotus effect, i.e., the beading of water into tight, quickly draining drops, becomes more pronounced with each application of the Ceramic Active-Shampoo and lasts significantly longer after repeated use. This is not an abstract marketing promise — the difference is noticeably visible after three to four regular washes: the vehicle dries faster after rinsing, dirt and dust adhere less intensely after the next drive, and the time until the next necessary intensive care is measurably extended. For vehicles with active ceramic protection, the Ceramic Active-Shampoo is the ideal everyday product that does not wash away the existing protective investment but cumulatively builds it up wash after wash. Those who work with it regularly will notice after a month at the latest that their vehicle stays significantly cleaner after rain than before.\u003c\/p\u003e\n\n\u003cp\u003eIn application, the Ceramic Active-Shampoo works like any classic shampoo: concentrate into the bucket, dilute to 1:200 to 1:500, soak the wash mitt, and wash the vehicle section by section. The ceramic polymers activate through mechanical friction and subsequent rinsing — no special dwell time is necessary, no special tools are required. This makes it the perfect everyday shampoo for anyone who washes their vehicle regularly and wants to keep it at a high level of protection permanently.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicles with an existing ceramic sealant, the Ceramic Active-Shampoo is the only logical choice in the washing range. Other shampoos — even good ones — do not remove the sealant, but they do not strengthen it either. The Ceramic Active-Shampoo actively uses every wash to renew and strengthen the protective layer. This adds up: after a year of regular washes with this product, a sealed vehicle has measurably more ceramic protection than a similar vehicle washed with a normal shampoo. This is a real, substantial advantage in everyday life — less dirt accumulation after every rainfall, faster drying after washing, and significantly less effort during the next care cycle.\u003c\/p\u003e\n\n\u003ch3\u003eXTREME Shampoo \"2 in 1\" and Foam+Seal — practical versatility for everyday use\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-xtreme-shampoo-2-in-1-autoshampoo\"\u003eXTREME Shampoo \"2 in 1\"\u003c\/a\u003e is the proven all-rounder in the range: a classic car shampoo with integrated conditioner action that simultaneously cleans and provides a protective layer to paint and plastic parts. The high concentration makes it particularly economical for regular use — individually or in professional use on multiple vehicles. It deliberately produces less foam than the lance shampoos, but is particularly efficient in classic bucket washing with a mitt or sponge: good gliding properties in the wash water, pleasant lubricity on the wash mitt, and no annoying streaks after drying. The \"2 in 1\" has been a reliable bestseller among home detailers and in professional operations for years — because it works without surprises and always delivers a clean, clear result.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-xtreme-foam-seal-schaumversiegelung-autoshampoo-versiegelung\"\u003eXTREME Foam+Seal \"Foam Sealant\"\u003c\/a\u003e goes a decisive step further: it combines the cleaning power of a stable pre-wash foam with an active sealing component in one product. Foam onto the damp or dry vehicle, let it dwell for a few minutes, then rinse off — done. The paint is cleaned and has simultaneously built up a fresh, hydrophobic protective layer. No separate sealing step afterward, no additional waiting time, no second product necessary. This is an intelligent entry into the care routine, especially for new vehicles: the very first wash immediately builds up protection, which can be further expanded with every subsequent application of the Ceramic Active-Shampoo. For busy car owners who have little time for elaborate care routines but still want well-maintained and protected results, Foam+Seal is the smartest solution in the range.\u003c\/p\u003e\n\n\u003ch3\u003eFoam washing with the lance — techniques and tips for best results\u003c\/h3\u003e\n\u003cp\u003eThe foam lance is one of the best tools you can use for car care — but only if you use it correctly. The most common mistake: too little dwell time. Those who foam and rinse immediately waste the shampoo's potential. Foam needs at least three, preferably five minutes on the paint to develop its chemical cleaning power. Use this time: while the bodywork is in the foam, you can already pre-treat rims or door sills. Another basic rule: always apply foam from bottom to top and rinse from top to bottom — this prevents dirt from running over already treated surfaces and causing new scratches.\u003c\/p\u003e\n\n\u003cp\u003eAnother trick for better results with the foam lance: pre-rinse the vehicle with clear water before foaming so that loose dust and sand are already washed away before the foam is applied. Sand in the foam creates micro-scratches during dwell time — especially on high-gloss black or dark metallic paint, this is clearly visible later. This simple step takes 30 seconds and prevents one of the most common causes of damage during self-washing.\u003c\/p\u003e\n\n\u003cp\u003eWater temperature also plays a role: cold water during pre-wash creates a little less foam, but is clearly the better choice for hot vehicle parts in summer, because rapid evaporation on hot sheet metal leaves limescale spots. In winter, vehicle washing is generally recommended in a hall or during the warmest hours of the day outdoors — Rich-Foam and FoamGiant work reliably down to temperatures around freezing point, but below 5 degrees Celsius, all foam shampoos measurably lose stability. Store the products frost-free and they will remain usable for years. After rinsing the foam, the actual hand wash with the 2-bucket system and a soft microfiber or lamb's wool wash mitt — this is the most gentle on the paint and gives the shampoo the best chance to completely remove even stubborn residues.\u003c\/p\u003e\n\n\u003ch3\u003eWhich XTREME Shampoo is right for you?\u003c\/h3\u003e\n\u003cp\u003eThe choice of the right shampoo depends less on your vehicle type than on your washing equipment and your specific care goal. Do you have a foam lance? Then the \u003cstrong\u003eRich-Foam Shampoo\u003c\/strong\u003e is the first choice for regular washes — reliable, stable, coating-compatible. For heavy dirt or after longer breaks without washing, use the \u003cstrong\u003eFoamGiant\u003c\/strong\u003e for maximum dwell time. Do you want to actively build up ceramic protection or strengthen existing sealants during washing? Then the \u003cstrong\u003eCeramic Active-Shampoo\u003c\/strong\u003e is indispensable — it should become the standard product for every permanently sealed vehicle. For classic bucket washing, economical and uncomplicated, the \u003cstrong\u003eShampoo \"2 in 1\"\u003c\/strong\u003e is the robust, reliable choice. And those who want to clean and seal at the same time — in one step — rely on \u003cstrong\u003eFoam+Seal\u003c\/strong\u003e. All shampoos in the XTREME range are coating-compatible, dermatologically tested, and equally suitable for home users and professionals. The \u003ca href=\"\/en\/collections\/sonax-xtreme-waschen-shampoo\"\u003eXTREME Shampoos\u003c\/a\u003e category shows all available variants, sizes, and concentrations at a glance — ideal for direct comparison before purchase, including all information on dosage and compatibility with your existing protective layer.\u003c\/p\u003e","products":[{"product_id":"sonax-xtreme-shampoo-2-in-1-autoshampoo","title":"XTREME Shampoo \"2 in 1\" Car Shampoo","description":"\u003ch2\u003eClean and Protect in One Step — SONAX XTREME Shampoo \"2 in 1\"\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does a 2-in-1 car shampoo do during hand washing? SONAX's 2-in-1 car shampoo combines the cleaning power of a high-quality car shampoo with an integrated wax component — dirt and oil residues are removed, while a light protective layer is built up on the paint.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eFor those who want to skip waxing or sealing after hand washing, without completely sacrificing paint protection, the \u003cstrong\u003eSONAX XTREME Shampoo \"2 in 1\"\u003c\/strong\u003e offers the most compact solution: one product performs both functions — cleaning and a basic level of paint care in a single step. This saves time, reduces product consumption, and ensures a freshly protected paint surface with a silky gloss effect after every wash.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-in-1 Formula — Cleaning and Integrated Wax Protection in One Step.\u003c\/strong\u003e The XTREME Shampoo's formula combines cleaning-active surfactants with wax components that deposit on the paint during washing. After rinsing and drying, the shampoo leaves a wafer-thin layer of wax that repels water and protects the paint surface against new dirt. This wax component is not intended as a substitute for a full sealant, but it provides effective basic protection between regular maintenance intervals.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003epH-Neutral Formula for Paint-Friendly Use.\u003c\/strong\u003e Acidic or strongly alkaline detergents attack existing wax layers and sealants, significantly reducing their effective duration. The XTREME 2-in-1 Shampoo is formulated to be pH-neutral, so existing paint protection is not destroyed — an important feature for anyone who maintains their vehicle under a sealant or coating and does not want to thin out the protective layer with every wash.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHighly Concentrated — Economical Dosing for Many Washes.\u003c\/strong\u003e The shampoo is formulated as a concentrate, used in small amounts per wash. The 1-liter bottle thus lasts for many washes and is significantly more economical compared to diluted ready-to-use products. For hand washing with the bucket method, a small amount of concentrate is sufficient for a 10-liter wash bucket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 2-in-1 principle for car shampoos is not new, but its implementation varies greatly. Cheap 2-in-1 products often contain so little wax component that the protective effect is hardly measurable. The XTREME Shampoo \"2 in 1\" is formulated so that the amount of wax is sufficient to create a real lotus effect on the paint after washing — water beads up and rolls off with dirt particles, instead of flowing broadly over the surface. This self-cleaning effect is the most visible proof that the 2-in-1 formula actually works.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e For optimal results, the two-bucket method is recommended: fill one bucket with shampoo water, and a second with clear rinse water. After each panel, wash out the wash mitt in the rinse bucket before dipping it back into the shampoo water. This prevents dirt particles from accumulating in the shampoo water and being transferred back to the paint. Allow the shampoo to soak on the paint for a short time — 30 to 60 seconds — to improve the removal of road film and insect residues before rinsing. This optimally activates the 2-in-1 formula: cleaning first, then wax deposition on the cleaned surface.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e2-in-1 Formula of SONAX XTREME Shampoo — Cleaning and Wax Care Combined\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX XTREME Shampoo \"2 in 1\"\u003c\/strong\u003e uses a surfactant-wax combination that acts sequentially during washing: First, the surfactants dissolve dirt crusts, road film, and organic deposits from the paint surface. In the same wash water film are the wax molecules, which deposit on the clean paint as soon as the dirt is removed. During rinsing, the surfactants are washed off, while the wax components remain on the paint and dry.\u003c\/p\u003e\n\n\u003cp\u003eThe wax component in the 2-in-1 shampoo works differently from an applied carnauba wax layer or a ceramic sealant: it is significantly thinner and less durable, but it provides a fresh protective film directly after every wash. Those who wash their vehicle weekly thus continuously build up a basic protection — each wash renews the protective layer. This is a different philosophy than a one-time, long-term sealant, but very practical for active drivers with a regular wash cycle.\u003c\/p\u003e\n\n\u003cp\u003eThe pH-neutral formulation is the decisive factor for compatibility with existing coatings. Alkaline shampoos (pH \u003e 7) act as degreasers and thus attack both dirt and wax layers and polymer sealants. If you have an active coating or a fresh wax sealant on your vehicle, you must pay attention to pH neutrality in the shampoo — the XTREME 2-in-1 Shampoo respects existing protective layers and simultaneously builds its own.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicles that are occasionally re-washed by hand after an automatic car wash, the 2-in-1 shampoo is the most suitable supplementary product: the car wash removes coarse dirt, and hand washing with the 2-in-1 shampoo removes residual contamination and renews the paint protection. This creates an efficient care cycle that does not require separate wax applications. Also for seasonal vehicles that are thoroughly cleaned after winter, an initial wash with the 2-in-1 shampoo is a quick way to remove winter grime from paint and glass and simultaneously build fresh wax protection.\u003c\/p\u003e\n\n\u003ch3\u003eApplication of the 2-in-1 Shampoo — Hand Wash, Dosing, and Results\u003c\/h3\u003e\n\n\u003cp\u003eThe dosage of the XTREME 2-in-1 Shampoo depends on the water temperature and the degree of contamination. For a 10-liter bucket, 30–50 ml of concentrate is usually sufficient — too high a dosage creates too much foam and makes rinsing more elaborate. The foam itself is not a quality criterion for car shampoo — it should be sufficient, but not excessive. Too much foam is a sign of overdose and can easily leave a cloudy residue after rinsing.\u003c\/p\u003e\n\n\u003cp\u003eAfter washing, the vehicle should be rinsed as completely as possible with clean water to remove all surfactant residues. The wax components remain on the paint during rinsing because they are hydrophobic and are not washed away by water. After drying, the wax effect becomes apparent: water beads up on freshly washed paint and rolls off — a visual indicator of a functional wax film.\u003c\/p\u003e\n\n\u003cp\u003eDrying after rinsing should be done with an absorbent microfiber cloth. Water spots caused by standing water can leave limescale residues that impair the gloss effect of the fresh wax layer. Quick drying with a professional drying towel immediately after rinsing prevents these limescale residues and instantly presents the result of the wash: a clean, shiny vehicle with a fresh protective layer.\u003c\/p\u003e\n\n\u003cp\u003eFor stubborn dirt such as insect residues on the front or tar spots on the sills, the 2-in-1 shampoo alone is not always sufficient. In these cases, pre-treatment with an insect remover or tar cleaner is recommended before using the shampoo. The shampoo then takes over the final cleaning and the protective layer formation. This is the most sensible division of labor: special cleaner for stubborn stains, shampoo for the general surface.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Application for XTREME 2-in-1 Shampoo — Everyday Care and Regular Washing\u003c\/h3\u003e\n\n\u003cp\u003eThe 2-in-1 shampoo is the ideal everyday shampoo for all drivers who wash regularly and want to avoid separate waxing. It is particularly suitable for vehicles driven under normal conditions — not for vehicles with fresh ceramic coatings, where no foreign wax should be applied, as the wax component can affect the coating surface.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicles that are regularly detailed and need to be kept clean and protected between major maintenance appointments, the 2-in-1 shampoo is the most practical solution. It extends the effectiveness of an existing sealant if it is pH-neutral, and it renews basic protection even if no active sealant is present. For vehicles that are driven daily and washed weekly, the 2-in-1 principle covers all care needs without additional products.\u003c\/p\u003e\n\n\u003cp\u003eThe shampoo is also well suited for motorhome and camping vehicles: the 1-liter format is travel-friendly, dosing is uncomplicated, and the 2-in-1 principle means that no separate waxing step is necessary after washing — practical when space and time are limited. The quick wax effect after rinsing also protects the vehicle paint against UV radiation and slight oxidation on long journeys.\u003c\/p\u003e\n\n\u003ch3\u003eXTREME Shampoo \"2 in 1\" in Comparison — Between Pure Shampoo and Sealant Shampoo\u003c\/h3\u003e\n\n\u003cp\u003eWithin the SONAX XTREME shampoo range, the \"2 in 1\" occupies a middle position: it offers more than a pure cleaning shampoo, but less than a sealant shampoo like \u003ca href=\"\/en\/products\/sonax-xtreme-foam-seal-schaumversiegelung-autoshampoo-versiegelung\"\u003eSONAX XTREME Foam+Seal\u003c\/a\u003e, which applies a durable sealing layer. The 2-in-1 shampoo is the everyday product — practical, versatile, with an immediate wax effect, but without the claim of long-term sealing.\u003c\/p\u003e\n\n\u003cp\u003eThose seeking maximum foam enjoyment during washing choose the \u003ca href=\"\/en\/products\/sonax-xtreme-foamgiant-shampoo-autoshampoo\"\u003eSONAX XTREME FoamGiant Shampoo\u003c\/a\u003e — a pure cleaning shampoo with very high foam volume, ideal for freshly sealed vehicles without a wax component. For permanent sealing reinforcement with every wash, the \u003ca href=\"\/en\/products\/sonax-profiline-reload-shampoo-versiegelungsshampoo\"\u003eSONAX PROFILINE Reload Shampoo\u003c\/a\u003e is the professional alternative — it actively recharges SiO₂ sealants. The 2-in-1 shampoo positions itself in between: more protection than a pure shampoo, but a simpler formulation than a specialized sealant shampoo.\u003c\/p\u003e\n\n\u003cp\u003eCompared to the \u003ca href=\"\/en\/products\/sonax-xtreme-ceramic-activeshampoo-autoshampoo\"\u003eSONAX XTREME Ceramic Active-Shampoo\u003c\/a\u003e, the 2-in-1 product differs fundamentally: the Ceramic Shampoo uses SiO₂ particles for ceramic protection and is tailored to vehicles with active ceramic coatings. The XTREME 2-in-1 Shampoo uses classic wax components and is designed for broad everyday use without specific coating technology — simpler, but completely sufficient for the standard driver.\u003c\/p\u003e\n\n\u003ch3\u003eBuy SONAX XTREME Shampoo \"2 in 1\" — The Everyday Shampoo with Integrated Wax Protection\u003c\/h3\u003e\n\n\u003cp\u003eThis shampoo is the standard product for regular hand washing with the desire for nourishing wax protection without extra effort. The 1-liter bottle provides many washes with economical dosing and is the ideal format for home use.\u003c\/p\u003e\n\n\u003cp\u003eFor anyone who regularly washes their vehicle themselves and wants to take care of paint protection between larger care intervals, the 2-in-1 shampoo is the most compact solution: one product, one step, one result — clean, protected, shiny. In combination with an absorbent microfiber cloth for drying, it delivers a complete everyday wash result without extra effort.\u003c\/p\u003e\n\n\u003cp\u003eFor those who want to dive deeper into the SONAX XTREME washing experience, the 2-in-1 shampoo can be combined with a SONAX PROFILINE drying towel for drying and occasionally with a quick sealant product for fresh, deep gloss. The 2-in-1 shampoo provides basic care with every wash — for special occasions, a quick sealant supplements the protection. This combination of everyday care and targeted deep care is the most practical strategy for a consistently well-maintained vehicle with minimal time expenditure.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":49160877769039,"sku":"D1-SNX-02153000","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/Sonax-XTREME-Shampoo-2-in-1-5.png?v=1721514265"},{"product_id":"sonax-xtreme-richfoam-shampoo-autoshampoo","title":"XTREME Rich-Foam Shampoo Car Shampoo","description":"\u003ch2\u003eMaximum Foam Performance for Foam Gun and 2-Bucket Wash — SONAX XTREME Rich-Foam Shampoo in Practical Test\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhich washing method is a Rich-Foam Shampoo particularly suitable for? Specially developed for foam guns and foam pre-wash — dense foam adheres to the vehicle's paintwork and gently loosens dirt before the first contact with a sponge or wash mitt.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThose who love their vehicle know: The first water contact is the most dangerous moment for the paintwork. Dirt, which is dragged across the surface with a wash mitt or sponge during pre-washing, leaves swirls. The \u003cstrong\u003eSONAX XTREME Rich-Foam Shampoo\u003c\/strong\u003e addresses this point: a pre-wash with dense, long-lasting foam loosens road film, insect residues, and loose dirt from the surface before the first contact wash begins. The result is a significantly safer washing process that keeps the paint surface scratch-free in the long term.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDense, long-lasting foam for effective pre-wash.\u003c\/strong\u003e The Rich-Foam Shampoo formula is designed for maximum foam production, whether in a foam gun attached to a high-pressure cleaner or a foam attachment on a garden hose. The foam sticks to the paintwork, runs off slowly, and thus has sufficient contact time to chemically dissolve dirt before it is rinsed off.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003epH-neutral and coating-compatible for modern protective layers.\u003c\/strong\u003e The Rich-Foam Shampoo does not attack wax or ceramic sealants. The pH-neutral range protects applied protective layers and thus supports the durability of coatings, waxes, and polymer sealants. It can be used without hesitation on freshly sealed vehicles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEconomical concentration for 1 and 5 liters.\u003c\/strong\u003e The XTREME Rich-Foam Shampoo is available in 1-liter and 5-liter containers. When used in a foam gun, the concentration is variable — more or less shampoo can be used depending on the degree of soiling. For businesses with a high wash volume, the 5-liter container is the more economical solution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Use the Rich-Foam Shampoo as the first step in a low-contact pre-wash protocol: spray on foam, let it work for 3–5 minutes (do not let it dry), rinse with low water pressure, and then continue washing with a wash mitt and fresh shampoo using the 2-bucket method. This two-stage approach significantly reduces dirt introduction during contact washing. In summer or in direct sunlight, shorten the dwell time, otherwise the product may dry on hot paintwork.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eRich-Foam Formula and Foam Technology — Why Dense Foam Is More Than Just a Visual Feature\u003c\/h3\u003e\n\n\u003cp\u003eFoam in the washing process is often considered a purely optical effect — a lot of foam looks professional, but does it really do more? The honest answer is: Yes, but not for the reasons most people assume. Cleaning power comes from the surfactants in the shampoo, not from the foam itself. What dense, long-lasting foam achieves is time: it keeps the surfactant-containing shampoo on the paintwork longer, extends the contact time, and thus allows for better chemical dissolution of dirt before it is carried away by the rinse water.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX XTREME Rich-Foam Shampoo\u003c\/strong\u003e uses a formula that, with correct dosing in a foam gun, generates particularly high foam density and coherence. The foam bubbles burst slowly — the foam adheres to the paintwork for several minutes without immediately running off. This is technically more complex to formulate than simply \"a lot of soap,\" because the foam must be dense enough to adhere and fine-pored enough to be applied evenly. Coarse foam bubbles burst quickly and distribute the cleaner unevenly.\u003c\/p\u003e\n\n\u003cp\u003eAnyone driving a vehicle with a fresh ceramic coating often asks whether a foam shampoo could damage the coating. The answer for pH-neutral products is clear: No. Alkaline shampoos with pH \u003e 9 can attack the polymeric structure of ceramic coatings and gradually degrade their hydrophobic properties over time. pH-neutral products like the XTREME Rich-Foam Shampoo have no chemical affinity to the Si-O bonds of ceramic coatings and leave them untouched. This property is particularly relevant for vehicles that are regularly treated with a professional coating and whose lifespan is to be maximized.\u003c\/p\u003e\n\n\u003cp\u003eAn important detail concerns compatibility with different foam gun types. Foam guns for high-pressure cleaners (typically Kärcher, Nilfisk) generate more foam density through the nozzle than foam attachments for garden hoses. The Rich-Foam Shampoo works in both systems, but delivers the best performance in combination with a high-quality high-pressure foam gun. The concentration in the foam gun reservoir should be varied between 1:5 and 1:10 depending on the model — a test run with a small panel quickly shows which dosage produces the optimal foam density for the respective device.\u003c\/p\u003e\n\n\u003cp\u003eWhen using the Rich-Foam Shampoo for the first time, one should start with a clean test panel to find the correct dosage for their own foam gun. The ideal mixing ratio varies depending on water hardness, water pressure, and gun model. A shampoo that is too diluted produces little foam; if too concentrated, it leads to premature drying and streaking. The dosage recommendation on the bottle is a good starting point, but a personal adjustment test will yield the best result for specific equipment.\u003c\/p\u003e\n\n\u003cp\u003eRegarding the chemistry in XTREME Rich-Foam Shampoo: It uses anionic surfactants as the main cleaning component, supplemented by foam-boosting additives. Anionic surfactants have a high affinity for oily contaminants such as road film, grease, and insect residues — the most common types of contamination on vehicle paintwork. The surfactant molecules encapsulate dirt particles and form micelles, which are dispersed in the water and carried away during rinsing. This mechanism is independent of foam formation — but the extended contact time provided by the foam gives the surfactants more time to completely encapsulate dirt.\u003c\/p\u003e\n\n\u003ch3\u003eProperly Using Rich-Foam Shampoo — Foam Gun, 2-Bucket Method, and Hand Wash\u003c\/h3\u003e\n\n\u003cp\u003eOptimal application depends on the available equipment. With a foam gun on a high-pressure cleaner: Fill the foam gun with shampoo diluted 1:5 to 1:10, foam the vehicle dry from top to bottom, let it work for 3–5 minutes, rinse from top to bottom with medium water pressure. Then, a normal contact wash with a fresh wash bucket and wash mitt. The Rich-Foam Shampoo can also be used for this second step — or for optimal versatility, it can be combined with \u003ca href=\"\/en\/products\/sonax-xtreme-ceramic-activeshampoo-autoshampoo\"\u003eSONAX XTREME Ceramic ActiveShampoo\u003c\/a\u003e for contact washing, which contains additional Si-Carbon care components.\u003c\/p\u003e\n\n\u003cp\u003eFor the pure 2-bucket method without a foam gun: Add 30–50 ml of Rich-Foam Shampoo to 10 liters of water in the wash bucket, foam up with a high-pressure cleaner or garden hose to support foam formation. Dip the wash mitt into the shampoo water, wash the vehicle panel by panel from top to bottom, always rinsing the mitt in the clear water bucket between panels (2-bucket method) to prevent dirt from being transferred back to the paintwork. The Rich-Foam Shampoo also produces enough foam in the classic bucket wash for a silky-smooth washing experience.\u003c\/p\u003e\n\n\u003cp\u003eThose who perform seasonal washes — such as the first wash after winter, when road salt residues and de-icing emulsion cover the underbody and wheel arches — should combine the Rich-Foam Shampoo with a separate underbody shampoo or engine cleaner. The Rich-Foam Shampoo is designed for visible paint surfaces, not for intensive cleaning of underbody areas. A clear separation of application areas ensures the best results: Rich-Foam for the bodywork, specialized underbody products for the demanding areas beneath.\u003c\/p\u003e\n\n\u003cp\u003eVehicles with ceramic coatings or polymer sealants particularly benefit from the pH-neutral formula of the Rich-Foam Shampoo. Alkaline shampoos can gradually degrade the hydrophobic properties of a sealant with regular use — pH-neutral products preserve them. Those who regularly wash their vehicle themselves and want to maintain a sealant for months should exclusively use pH-neutral shampoos. The Rich-Foam Shampoo is compatible with all common ceramic coatings, wax layers, and polymer sealants.\u003c\/p\u003e\n\n\u003ch3\u003eWashing Results and Areas of Application — What a Rich-Foam Shampoo Can Achieve\u003c\/h3\u003e\n\n\u003cp\u003eAfter a complete Rich-Foam pre-wash and contact wash process, the vehicle is streak-free and clean with a slight wet-look gloss that results in an evenly shiny finish after drying. The shampoo leaves no residue and no white streaky film — a problem that occurs with some inexpensive shampoos in hard water. The Rich-Foam Shampoo is also well-suited for regions with hard water because its formulation minimizes limescale deposits on the paint surface.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicles with heavy soiling — a lot of road salt in winter, heavy insect residues in summer, brake dust accumulations on the wheel arches — the Rich-Foam Shampoo alone is not sufficient. Chemical pre-treatment with an active cleaner or an insect remover before foaming is necessary in these cases. The Rich-Foam Shampoo then takes over the cleaning of the pre-dissolved contaminants in the second step. As an all-weather basic shampoo for regularly maintained vehicles with moderate everyday soiling, the Rich-Foam Shampoo is, however, completely sufficient.\u003c\/p\u003e\n\n\u003cp\u003eOne aspect rarely discussed with car shampoos: the fragrance. In professional operations, strongly scented shampoos can be bothersome during long hours of work in enclosed spaces. The XTREME Rich-Foam Shampoo has a subtle, fresh inherent scent that does not interfere with operation. This is a detail that makes a difference during daily use over several hours.\u003c\/p\u003e\n\n\u003cp\u003eFor professionals in the car wash sector, the 5-liter container offers an economical setup. With a dosage of 50 ml per wash (foam gun), a 5-liter container is sufficient for 100 vehicles. This corresponds to a product cost of about 34 cents per vehicle — an amount that is calculable for professional businesses and plays no significant role in the overall cost calculation.\u003c\/p\u003e\n\n\u003ch3\u003eShampoo Comparison — Rich-Foam vs. Foam+Seal vs. FoamGiant vs. Ceramic Active\u003c\/h3\u003e\n\n\u003cp\u003eThe SONAX XTREME shampoo range offers different products for various requirements. The \u003cstrong\u003eSONAX XTREME Rich-Foam Shampoo\u003c\/strong\u003e is the pure wash shampoo — maximum foam performance for careful pre-washing, without additional sealing components. If you want to refresh the protective layer with every wash, choose \u003ca href=\"\/en\/products\/sonax-xtreme-foam-seal-schaumversiegelung-autoshampoo-versiegelung\"\u003eSONAX XTREME Foam+Seal\u003c\/a\u003e: It contains a polymer sealing component that is applied with each wash and gradually builds up the hydrophobicity of the paintwork. The trade-off: It leaves a slight build-up film that can lead to slight clouding with frequent use.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to differences in foam technology, surface compatibility also plays a role. The XTREME Rich-Foam Shampoo is suitable for painted surfaces, chrome, glass, and exterior plastic parts. For rims, however, a separate rim cleaner is recommended, as rims generally have more brake dust and grease than a standard shampoo can efficiently remove. The typical practical recommendation: First pre-treat rims with rim cleaner, then foam the entire vehicle with Rich-Foam Shampoo — this way, rim dirt is not transferred to the bodywork.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-xtreme-foamgiant-shampoo-autoshampoo\"\u003eSONAX XTREME FoamGiant Shampoo\u003c\/a\u003e is also designed for maximum foaming, but optimized for use in professional foam lances and pressure tank systems. The viscosity and concentration differ slightly from the Rich-Foam Shampoo, which yields different results depending on the type of foam gun. A direct comparison on your own equipment provides the best answer to the question of which product works better for your specific equipment.\u003c\/p\u003e\n\n\u003cp\u003eThe question of rinsing after the foam application also deserves attention. A complete rinsing of the foam before contact washing is important so that the wash mitt works on the cleanest possible surface in the second step — not on a mixture of foam and bound dirt. Those who work with hard water can use a very thin final rinse with deionized water at the end to prevent limescale spots during drying. However, this concerns drying management after washing, not the shampoo itself.\u003c\/p\u003e\n\n\u003cp\u003eThe SONAX XTREME Ceramic ActiveShampoo, on the other hand, has a different focus: It contains Si-Carbon technology for coating-compatible care and is the shampoo of choice for vehicles with ceramic coatings that should receive an Si-Carbon refreshment with every wash. Those who simply want to clean an unsealed vehicle can fully rely on the Rich-Foam Shampoo; those who actively want to integrate coating care into the washing process are better served with the Ceramic ActiveShampoo.\u003c\/p\u003e\n\n\u003ch3\u003eFor Whom the Rich-Foam Shampoo from SONAX Is the Right Choice\u003c\/h3\u003e\n\n\u003cp\u003eThe Rich-Foam Shampoo is the entry-level shampoo for anyone who wants to professionalize their washing routine with a foam pre-wash. Those who own a high-pressure cleaner or a foam gun and want to minimize the scratch-generating moments of contact washing will find the right product for the pre-wash step in the Rich-Foam Shampoo. It is easy to dose, versatile, and in a price segment that does not pose a financial hurdle even for regular users.\u003c\/p\u003e\n\n\u003cp\u003eFor businesses that regularly clean their customers' vehicles and value gentle paint care, the 5-liter container is the right size. The scalable dosing gives the freedom to adjust the shampoo concentration as needed — from light routine washes to more intensive pre-cleaning before a polishing step. For home users without a high-pressure cleaner, the Rich-Foam Shampoo in a 1-liter container is suitable. With a simple foam attachment for the garden hose, a foam pre-wash can be performed even without a high-pressure cleaner — the result in terms of foam density is not quite as impressive, but sufficient for a significantly safer contact wash than without pre-wash. Even in a parking lot with a bucket and a microfiber wash mitt, the Rich-Foam Shampoo can be used as a normal washing agent — the foam advantage is not fully utilized, but the cleaning performance and coating compatibility are maintained.\u003c\/p\u003e\n\n\u003cp\u003eAs a verified SONAX specialist dealer, Detailing1 permanently carries the XTREME Rich-Foam Shampoo in both container sizes and recommends it as a basic shampoo for any vehicle washing workflow that values paint-friendly cleaning.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":49160879702351,"sku":"D1-SNX-02483000","price":10.55,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":49310954193231,"sku":"D1-SNX-2485000","price":32.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/Sonax-XTREME-RichFoam-Shampoo-Auto-Shampoo-1-Liter-1.png?v=1721514365"},{"product_id":"sonax-xtreme-ceramic-activeshampoo-autoshampoo","title":"XTREME Ceramic Active Shampoo Car Shampoo","description":"\u003ch2\u003eEvery Wash an Enhanced Ceramic Protection — SONAX XTREME Ceramic ActiveShampoo\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat can a car shampoo with Si-Carbon Technology do? The Ceramic Shampoo from the SONAX XTREME line deposits silicon dioxide particles onto the paint with every hand wash, building up a water and dirt-repellent ceramic protective layer — cleaning and protection in one step.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eAnyone who regularly hand washes their vehicle spends a lot of time with a bucket — and misses out on building protection if they use a conventional shampoo. The \u003cstrong\u003eSONAX XTREME Ceramic ActiveShampoo\u003c\/strong\u003e changes this equation: The 500ml concentrate uses Si-Carbon Technology to actively build ceramic protection on paint, glass, plastic, and chrome during the washing process itself. Each wash thus strengthens the protective film — instead of merely maintaining or neutralizing it. This is the conceptual difference from classic shampoos, which neither build up coatings nor actively supplement existing ones.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCleaning and ceramic protection in one step.\u003c\/strong\u003e The Ceramic ActiveShampoo combines high dirt-dissolving power with active protection building: While the wash foam dissolves road grime, insect residue, and brake dust, Si-Carbon particles deposit on the surface. The result after drying: a freshly washed vehicle with more intense water beading than before the wash. No separate sealing step is necessary.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible with existing ceramic coatings and paint sealants.\u003c\/strong\u003e The Ceramic ActiveShampoo is formulated not to attack or remove existing hard waxes, polymer sealants, and ceramic coatings. Instead, it supplements these protective layers: With each wash, dirt is removed, and the existing protective layer is supported by fresh Si-Carbon particles. If you already have a coating, the shampoo serves as a maintenance product that actively strengthens the coating between refreshes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh yield due to concentrated formula.\u003c\/strong\u003e The dosage is 50 ml per 10 liters of warm water — thus, the 500ml bottle yields approximately 10 complete hand washes for a normal car. Compared to conventional shampoos with a similar dosage ratio, the Ceramic ActiveShampoo provides significantly greater benefits for the same quantity: Each of these 10 washes is simultaneously a protective treatment that is entirely absent with a normal shampoo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e The Ceramic ActiveShampoo develops its protective effect best on clean, dry paint. Always rinse off coarse dirt with cold water before washing — this prevents coarse dirt from damaging the paint during washing. For maximum ceramic protection buildup after washing, dry the vehicle with an absorbent microfiber drying towel instead of letting it air dry: Drying works the Si-Carbon particles more evenly into the surface. If you want an even more intensive refresh after washing, supplement the wash with a spray of \u003ca href=\"\/en\/products\/sonax-xtreme-ceramic-quickdetailer-quick-detailer\"\u003eSONAX XTREME Ceramic QuickDetailer\u003c\/a\u003e on the damp paint before drying — this doubles the protective film without extra effort.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSi-Carbon Technology — how Ceramic ActiveShampoo builds ceramic protection with every wash\u003c\/h3\u003e\n\n\u003cp\u003eSi-Carbon Technology is the basis of \u003cstrong\u003eSONAX XTREME Ceramic ActiveShampoo\u003c\/strong\u003e. The term describes a formulation based on silicon dioxide particles (SiO₂) — the same base material used in professional ceramic coatings. The difference from classic coatings lies in the size and processing form of the particles: Professional coatings use reactive SiO₂ compounds that chemically bond with the paint, forming a permanently hard protective layer. The Ceramic ActiveShampoo contains smaller Si-Carbon particles suspended in the shampoo emulsion, which physically deposit on the surface during the washing process and form a lubricious, hydrophobic protective layer as soon as the water evaporates.\u003c\/p\u003e\n\n\u003cp\u003eThis deposited layer is less permanent than a chemically bonded coating, but it provides fresh protection with every wash. The system is cumulative: The more regularly the vehicle is washed with Ceramic ActiveShampoo, the more evenly and thickly the protective film builds up. Three to five washes are typically sufficient to achieve a significantly improved lotus effect and enhanced water beading — comparable to a mild polymer sealant state. With consistent weekly washing over several months, a stable level of protective film develops, which lasts longer between washes than on untreated paint.\u003c\/p\u003e\n\n\u003cp\u003eThe compatibility of Ceramic ActiveShampoo with various surfaces is an important practical aspect. Si-Carbon Technology is designed for paint pH compatibility — the shampoo has a pH value in the neutral to slightly alkaline range, which is compatible with all common automotive paints. For coated surfaces, it is crucial that the shampoo does not contain aggressive surfactants that would strip a coating: Ceramic ActiveShampoo is formulated precisely for this — gentle enough to preserve a coating, yet strong enough to dissolve road grime. On glass surfaces, the silicon dioxide layer also supports the lotus effect and improves water runoff speed on the windshield in rain.\u003c\/p\u003e\n\n\u003cp\u003eA common misconception about Si-Carbon Technology: Ceramic ActiveShampoo is not a substitute for professional ceramic coatings. It cannot replicate or replace the chemically bonded long-term protective power of a 2-year coating. Its strength lies in a different application concept: Regular, uncomplicated protective care with every wash — without a separate sealing step, without curing time, without special equipment.\u003c\/p\u003e\n\n\u003ch3\u003eApplying Ceramic ActiveShampoo — dosage, foam, and correct procedure\u003c\/h3\u003e\n\n\u003cp\u003eThe correct application of Ceramic ActiveShampoo begins with the dosage: 50 ml concentrate per 10 liters of warm water. This mixture yields sufficient foam volume for a medium-sized vehicle and provides enough Si-Carbon particles for even protection buildup. Less shampoo saves product, but also reduces the concentration of active ceramic particles and thus the protective effect — underdosing is the most common application error with Ceramic ActiveShampoo.\u003c\/p\u003e\n\n\u003cp\u003eThe recommended washing procedure: First, pre-rinse the vehicle with clear, cold water to loosen coarse dirt and sand particles. Then, work from top to bottom with the mixed Ceramic ActiveShampoo and a wash mitt (lambswool\/microfiber mitt) — roof, windows, hood, sides, finally sills and bumpers. For heavily soiled areas such as sills and wheel arches, a separate bucket with fresh shampoo solution is recommended to prevent coarse dirt from the wheel arches from transferring to the paint surfaces (two-bucket method). After washing, rinse thoroughly with clear water until no shampoo is visible.\u003c\/p\u003e\n\n\u003cp\u003eDrying is more important with this product than with a classic shampoo: Since the Si-Carbon particles remain on the surface as the water film evaporates, even drying is crucial for uniform protective film buildup. A high-quality microfiber drying towel with sufficient absorbency (at least 400 g\/m²) ensures that no water spots occur that could disrupt particle distribution. Never simply let the vehicle air dry after washing if you want to achieve maximum protective effect — running water draws the Si-Carbon particles into streaks and distributes them unevenly.\u003c\/p\u003e\n\n\u003cp\u003eCeramic ActiveShampoo is suitable exclusively for hand washing — not for machine washing or pressure washers. The high foam development would cause problems in automatic car washes; moreover, physical application with a wash mitt is necessary to rub the Si-Carbon particles into the surface and optimally incorporate them. The machine rollers during contact washing in the bays do not have this advantage — the even contact pressure of the wash mitt is crucial for protection buildup.\u003c\/p\u003e\n\n\u003ch3\u003eCeramic protection through washing — water beading, durability, and compatibility\u003c\/h3\u003e\n\n\u003cp\u003eThe most noticeable result after washing with Ceramic ActiveShampoo is the altered water beading behavior. Even after the first wash, the difference is noticeable on untreated paint: Water beads off faster, the contact angles between water droplets and paint increase, and the lotus effect is significantly stronger than after a wash with a non-protective shampoo. With each subsequent wash, this effect intensifies until a stable plateau is reached — typically after 3–5 washes.\u003c\/p\u003e\n\n\u003cp\u003eThe durability of the protective film between washes depends heavily on environmental conditions. With normal urban use (garage or carport parking, average rain exposure), the built-up protective film lasts 2–4 weeks at a level significantly higher than that of untreated paint. With intensive driving, highway driving with heavy insect and stone chip impact, or salt exposure in winter, the protective film degrades faster — making regular washing even more important, as it automatically builds up and renews protection. Ceramic ActiveShampoo is, in this sense, a system: Not a one-time treatment, but a routine product that unfolds its protective effect through regularity.\u003c\/p\u003e\n\n\u003cp\u003eOn glass surfaces — windshield, side windows, tailgate — Si-Carbon Technology exhibits a particularly practical side effect: Water runs off significantly faster in driving wind above 60 km\/h, as the silicon dioxide layer increases the contact angle between water and glass. Those who regularly wash their vehicle with Ceramic ActiveShampoo also benefit from improved rain runoff on the windows without a separate glass sealant. The effect on glass is less pronounced than with a dedicated glass sealant, but for everyday drivers during quick washes, it's a welcome side benefit.\u003c\/p\u003e\n\n\u003cp\u003eParticularly relevant for vehicle owners with existing coatings: Ceramic ActiveShampoo does not attack hard waxes, polymer sealants, and chemically bonded ceramic coatings. It can be used without hesitation as a wash maintenance shampoo for coated vehicles. The Si-Carbon particles deposit on the existing coating and enhance its hydrophobicity between regular refreshes. Those working with a professional ceramic coating and maintaining it with regular topcoat refreshes can integrate Ceramic ActiveShampoo as an everyday wash product into their maintenance workflow — without fear of compromising the more expensive coating.\u003c\/p\u003e\n\n\u003ch3\u003eCeramic ActiveShampoo compared — vs. normal shampoo and vs. foam sealant\u003c\/h3\u003e\n\n\u003cp\u003eThe comparison with a classic shampoo without protective components highlights the primary added value of Ceramic ActiveShampoo: A normal shampoo cleans and rinses — nothing more. It builds no protection, maintains no protection, and can even minimally reduce it if it temporarily alters the surface energy of the paint through surfactants. The 500ml bottle of Ceramic ActiveShampoo costs slightly more than a simple shampoo, but simultaneously provides active protection buildup. In a price-per-wash comparison (approx. 10 washes from 500ml), the extra cost per wash is small, but the added value is substantial.\u003c\/p\u003e\n\n\u003cp\u003eCompared to \u003ca href=\"\/en\/products\/sonax-xtreme-foam-seal-schaumversiegelung-autoshampoo-versiegelung\"\u003eSONAX XTREME Foam+Seal \"Foam Sealant\"\u003c\/a\u003e, there are clear positional differences: Foam+Seal is also a shampoo with a protective component, but it is more focused on the sealing component — it contains polymer waxes that build a thicker, more hydrophobic protective layer per application, but also requires a stronger surface for foam application. Ceramic ActiveShampoo's protective formulation is geared towards Si-Carbon particles and builds a finer protective film designed for ceramic compatibility. If you have a coating: Ceramic ActiveShampoo. If you don't have a coating and want to get maximum sealing effect from the shampoo: Foam+Seal.\u003c\/p\u003e\n\n\u003cp\u003eThe comparison with \u003ca href=\"\/en\/products\/sonax-xtreme-richfoam-shampoo-autoshampoo\"\u003eSONAX XTREME Rich-Foam Shampoo\u003c\/a\u003e shows a different profile: Rich-Foam Shampoo focuses on foam volume and lubricity as primary properties — ideal for the two-bucket method and soft-wax paint care, without an active protective component. It cleans very thoroughly and is particularly suitable for sensitive paints where residue-free rinsing is crucial. Ceramic ActiveShampoo has slightly more residue potential due to the Si-Carbon particles, which are intentionally meant to remain on the surface — for very sensitive soft paints or for vehicles that are to be polished directly after washing, Rich-Foam may be the better choice.\u003c\/p\u003e\n\n\u003ch3\u003eBuying car shampoo with ceramic protection — for whom Ceramic ActiveShampoo is the right choice\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX XTREME Ceramic ActiveShampoo\u003c\/strong\u003e is the ideal choice for vehicle owners who regularly hand wash their car and want to build protection incidentally — without extra time for a separate sealing step. Anyone who washes their car every one to two weeks invests no additional time but, after a few washes, gets significantly improved water beading and visibly deeper paint gloss. For this user group, Ceramic ActiveShampoo is the most efficient protective product in terms of effort and cost.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicle owners with existing ceramic coatings, Ceramic ActiveShampoo is the recommended choice for wash maintenance between annual coating refreshes. Since the shampoo contains no aggressive surfactants and actively supports the coating with Si-Carbon particles, regular use noticeably extends the lifespan and care intensity of the coating. A combination of weekly washing with Ceramic ActiveShampoo and monthly refreshing with SONAX XTREME Ceramic QuickDetailer keeps the coating in top condition long-term, without expensive professional applications between regular service intervals.\u003c\/p\u003e\n\n\u003cp\u003eFor new car owners, Ceramic ActiveShampoo is an ideal introduction to structured paint protection buildup: Those who start washing with a shampoo that actively builds protection from the beginning will benefit long-term from better paint condition than someone who only starts protective care years later — because the surface will already be more deeply oxidized then.\n\nCeramic ActiveShampoo is less suitable for vehicles that are exclusively washed in an automatic car wash, as well as for situations where polishing or applying a new coating immediately after washing — in these cases, a residue-free shampoo without protective components is more suitable. The product is also not intended for cleaning rims, tires, and chassis components; for these, the corresponding special cleaners from the SONAX range are recommended. As a verified SONAX specialist dealer, Detailing1 permanently stocks XTREME Ceramic ActiveShampoo — individually and as part of wash set recommendations. The product is available in a 500ml bottle; for businesses with higher wash volumes, purchasing multiple units is recommended, as the bottle is sufficient for approximately 10 hand washes and the ceramic protection buildup further improves with increased frequency of use.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"500ml","offer_id":49160880423247,"sku":"D1-SNX-2592000","price":11.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/Sonax-XTREME-Ceramic-Active-Shampoo-Autoshampoo-4.png?v=1721514270"},{"product_id":"sonax-xtreme-foam-seal-schaumversiegelung-autoshampoo-versiegelung","title":"XTREME Foam+Seal \"Foam Sealant\" Car Shampoo with Sealant","description":"\u003ch2\u003eWash and seal at the same time — with SONAX XTREME Foam+Seal Foam Sealant\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat can SONAX XTREME Foam+Seal do? The 2-in-1 sealing shampoo with foam formula gently cleans, refreshes existing sealants, creates a beading effect, and accelerates drying – for foam lances and foam sprayers.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eNormal car shampoo cleans the vehicle — and that's it. What if you could build up a protective layer on the paint or refresh an existing sealant while washing? That's exactly what \u003cstrong\u003eSONAX XTREME Foam+Seal\u003c\/strong\u003e promises: a sealing shampoo that, with a foam formula, creates a dense carpet on the vehicle, loosens dirt, restores maximum shine, and forms a water- and dirt-repellent protective layer — all in a single washing step. The result: a clean vehicle with a beading effect that also dries faster after washing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCleans and seals in one step.\u003c\/strong\u003e Foam shampoo and sealant at the same time means: no separate step with wax or spray sealant after washing. The sealing component is deposited on the paint during application and forms a hydrophobic protective layer — simple, efficient, without extra effort.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBeading effect and faster drying.\u003c\/strong\u003e The deposited sealant layer makes water bead. This is not only visually impressive but also reduces water spots from standing water and makes drying with a drying towel significantly faster. The special drying formula additionally speeds up the process.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefreshes existing sealants.\u003c\/strong\u003e If you have already protected your vehicle with a coating or a polymer sealant, Foam+Seal is beneficial as a maintenance shampoo: the sealing components supplement and activate the existing protective layer with every wash — without elaborate post-treatment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Foam+Seal achieves its full effect if the foam is allowed to act on the vehicle for a few minutes before you start working with a wash mitt. This gives the sealing component time to deposit evenly on the paint surface. Then rinse thoroughly — standing soap residues interfere with the even buildup of the protective layer. For optimal results, dry the vehicle immediately after washing.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSealing Shampoo Technology — how washing and sealing work together\u003c\/h3\u003e\n\n\u003cp\u003eThe concept behind \u003cstrong\u003eSONAX XTREME Foam+Seal\u003c\/strong\u003e initially sounds like a contradiction: a shampoo cleans — and in doing so, cleans away what is on the paint. How can it simultaneously build up a protective layer? The answer lies in the formulation. The sealing shampoo contains two active ingredient complexes: a surfactant-based cleaning block that loosens and emulsifies dirt, and a polymer protective component that deposits on contact with the paint — independently of the cleaning process. Dirt and protective polymer adhere to different surfaces and do not interfere with each other.\u003c\/p\u003e\n\n\u003cp\u003eThe foam is the carrier system for both components. It distributes both the cleaning surfactants and the sealing polymers evenly over the vehicle surface — even in areas that the wash mitt does not reach, such as deep in door handles, spoiler edges, or gap areas. After rinsing, the surfactants are washed away by the water; the sealing polymers adhere to the paint and form a thin, even protective layer.\u003c\/p\u003e\n\n\u003cp\u003eThis protective layer is not comparable to a complete polymer sealant or a ceramic coating — the layer thickness is thinner and the durability is correspondingly shorter. What Foam+Seal does is to regularly refresh the protective effect: If you treat the vehicle every second or third wash with Foam+Seal, you maintain a continuous basic sealant on the paint that withstands weathering, dirt deposits, and UV light significantly better than an unprotected paint finish.\u003c\/p\u003e\n\n\u003cp\u003eFoam+Seal is particularly interesting for vehicles that are already sealed with a coating. Many coating manufacturers recommend specific maintenance shampoos that do not overlay the coating surface with wax. Foam+Seal contains no carnauba wax components that could negatively affect coatings — it is a pure polymer maintenance product and therefore coating-compatible.\u003c\/p\u003e\n\n\u003cp\u003eAnother advantage over separate products: Those who previously washed separately and then re-sealed with a spray wax or quick detailer save the second step with Foam+Seal. The time saving per wash is small — perhaps 10–15 minutes — but over a year, this is a noticeable relief in vehicle care, without sacrificing protective effect. This makes the product particularly attractive for vehicle owners who wash consistently but do not want to deal intensively with detailing products.\u003c\/p\u003e\n\n\u003ch3\u003eApplying Foam+Seal correctly — foam lance, foam sprayer and optimal dwell time\u003c\/h3\u003e\n\n\u003cp\u003eFor the best results, application via a foam lance on a high-pressure cleaner is suitable. Fill the concentrate into the reservoir according to the manufacturer's instructions, spray the vehicle completely with foam, and let it dwell for 3–5 minutes. Then work with a soft wash mitt or sponge — the foam in the mitt reduces friction and protects the paint. Afterwards, rinse thoroughly with clear water.\u003c\/p\u003e\n\n\u003cp\u003eThe hand foam sprayer is the alternative without a high-pressure cleaner. It generates fine foam that is applied directly to the vehicle and worked in with a mitt. The cleaning performance is comparable; the foam carpet is slightly less dense than with a foam lance, but for the sealing effect, this is irrelevant — the polymers deposit regardless of foam density.\u003c\/p\u003e\n\n\u003cp\u003eIf you want maximum sealing effect, you can briefly rinse the vehicle with clear water after washing and dry it immediately with a nanofiber drying towel — without post-treatment. The protective layer is already on the paint at this point. Drying activates the sealing polymers and ensures even distribution. A vehicle that simply air-dries after a Foam+Seal wash already shows the beading effect during drying: water contracts into drops instead of standing flat on the paint.\u003c\/p\u003e\n\n\u003cp\u003eRegarding application temperature: As with all sealing products, the vehicle should not be treated when it is too hot or when it is freezing. The optimal application temperature is between 10 and 30 degrees Celsius. At hot outdoor temperatures or in direct sunlight, the foam dries too quickly — the polymers then deposit unevenly. Choose the shade or the cooler hours of the day for best results. In freezing temperatures, the product should not be used, as the polymers will not cure correctly at low temperatures.\u003c\/p\u003e\n\n\u003cp\u003eA practical question about yield: How many washes does one bottle provide? This depends on the vehicle size and equipment configuration. As a guideline: with normal dosage for a foam lance, a standard bottle is sufficient for well over ten complete vehicle washes — economical enough to use Foam+Seal as a regular everyday shampoo, without having to think about the costs every time you wash.\u003c\/p\u003e\n\n\u003ch3\u003eBeading effect and protective action — what Foam+Seal delivers in practice\u003c\/h3\u003e\n\n\u003cp\u003eThose who use a sealing shampoo like Foam+Seal for the first time often notice an immediate visible beading effect after washing. Water beads off the paint in small spheres — the lotus effect of the applied polymer protective layer is noticeable directly after the first wash. This effect is initially moderate and builds up with regular use over several washes: those who consistently use Foam+Seal accumulate a thicker polymer layer on the paint over time, which creates an increasingly strong beading effect.\u003c\/p\u003e\n\n\u003cp\u003eThe drying formula is a detail that makes more of a difference in everyday life than expected. Who doesn't know the problem: vehicle washed, now comes the drying — ten minutes with the drying towel until all surfaces are dry and streak-free. With the deposited sealant layer and the accelerated drying formula, water runs off faster; less water film remains on the paint and drying with the drying towel takes significantly less time. A small detail, but those who wash regularly appreciate every time advantage.\u003c\/p\u003e\n\n\u003cp\u003eImportant: Foam+Seal is not a substitute for a full polymer sealant or a ceramic coating. The protective layer that the shampoo builds up with each wash is thin and lasts between washes under normal conditions. If you are looking for long-lasting protection that lasts for months or longer, you need a dedicated sealant. Foam+Seal is the right product for maintenance between full sealant applications — it maintains the protection that a base sealant has built up.\u003c\/p\u003e\n\n\u003cp\u003eA common misunderstanding: If the beading diminishes after a few weeks without washing, it does not mean that the protective effect is gone. The thin polymer layer is still present, but it is reduced by dirt, water spots, and UV exposure. Another wash with Foam+Seal immediately brings back the beading effect because new polymers are applied to the cleaned surface. This is the difference from \"wearing out\" a full sealant: Foam+Seal is reapplied with each wash and thus builds itself up.\u003c\/p\u003e\n\n\u003ch3\u003eSealing shampoo comparison — Foam+Seal, Reload Shampoo and Ceramic Active-Shampoo\u003c\/h3\u003e\n\n\u003cp\u003eThe SONAX XTREME portfolio offers several shampoos with additional protective functions. The \u003ca href=\"\/en\/products\/sonax-profiline-reload-shampoo-versiegelungsshampoo\"\u003ePROFILINE Reload Shampoo\u003c\/a\u003e is a sealing shampoo from the PROFILINE series and is aimed at professional users who are looking for a stronger sealing component in the shampoo — it complements professional coatings and is designed for long durability. Foam+Seal, on the other hand, is more broadly accessible and designed for the average car owner who wants to build up protection easily and without extra effort.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-xtreme-ceramic-activeshampoo-autoshampoo\"\u003eXTREME Ceramic Active-Shampoo\u003c\/a\u003e contains ceramic active ingredients and is particularly suitable for vehicles with existing ceramic coatings — it activates and complements the ceramic surface with every wash. Foam+Seal uses polymeric active ingredients without ceramic content and is therefore the more universally applicable product — also for non-ceramic sealed vehicles or vehicles without an existing sealant.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicles with a fresh ceramic sealant, we recommend the Ceramic Active-Shampoo for maintenance use. For all other vehicles — unsealed, wax-sealed or polymer-sealed — Foam+Seal is the most effective and easiest way to build and maintain protection with every wash.\u003c\/p\u003e\n\n\u003cp\u003eAnother comparable product from a different product category are classic spray waxes, which are applied to the still-wet vehicle after washing. These often produce a slightly stronger shine effect and a thicker protective layer per application — but they require an additional step and an additional product. Foam+Seal makes exactly that superfluous. Those who choose between spray wax after washing and Foam+Seal as a washing shampoo essentially decide for or against the extra effort. Both variants are valid — Foam+Seal is the more convenient, spray wax potentially the more intensive.\u003c\/p\u003e\n\n\u003ch3\u003eBuying Sealing Shampoo — for whom is SONAX XTREME Foam+Seal worthwhile?\u003c\/h3\u003e\n\n\u003cp\u003eSONAX XTREME Foam+Seal is ideal for vehicle owners who want to make their car care as efficient as possible: washing and protecting at the same time, without planning a separate sealing step. The product is particularly useful for drivers who wash their vehicle weekly or every two weeks — the cumulative effect of the polymers becomes significantly better with regular use.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicles without an existing full sealant, Foam+Seal is an easy introduction to sealant care: no polishing machine needed, no elaborate coating, no curing times. Simply use it during normal washing and build up a basic protective layer with each application. The result is not comparable to a high-quality ceramic coating — but it is significantly better than no protection at all, with the least possible additional effort.\u003c\/p\u003e\n\n\u003cp\u003eFor new cars or freshly polished vehicles, Foam+Seal is an excellent way to protect the good condition of the paint from the start, without carrying out an elaborate sealing treatment. New paints do not yet have ingrained damage and benefit immediately from protection against UV radiation, bird droppings, and industrial fallout, which attack the surface with regular use. With consistent Foam+Seal use, the paint remains in a condition that, even after years, is significantly better than that of a completely unprotected vehicle with the same mileage.\u003c\/p\u003e\n\n\u003cp\u003eThe sensible workflow: Use Foam+Seal as a regular washing shampoo, supplementing it every two to three months with a more complete protective treatment — such as the \u003ca href=\"\/en\/products\/sonax-xtreme-ceramic-sprayversiegelung-spruehversiegelung\"\u003eSONAX XTREME Ceramic Spray Sealant\u003c\/a\u003e after washing or a quick coating. Foam+Seal maintains the basic protective layer; the supplementary treatment strengthens the protective effect at regular intervals. This is a practical, inexpensive, and effective alternative to expensive full sealants for anyone who wants to permanently protect their paint but doesn't want to polish and seal every weekend.\u003c\/p\u003e\n\n\u003cp\u003eSo, for those who want the best of both worlds — consistent protection buildup through regular washing, supplemented by occasional full sealing — Foam+Seal as an everyday shampoo provides a reliable base. The combination of washing and protecting in one step saves time, money, and effort, without reducing the protective effect to zero. For this application, Foam+Seal is the practical sealing principle: always a little better, with every wash.\u003c\/p\u003e\n\n\u003cp\u003eThis sealing shampoo is therefore one of the most sensible decisions for anyone who wants to achieve a lasting difference in the protection status of their vehicle with a single change in the washing workflow — away from normal shampoo, towards sealing shampoo. No additional product, no additional step, no learning curve. Simply replace the previous shampoo and start building in protection from the first wash. This makes Foam+Seal one of the most valuable everyday products in the detailing portfolio — not because it is the strongest product, but because it is the most consistent.\u003c\/p\u003e\n\n\u003cp\u003eFinal recommendation: Start with a thorough basic cleaning of the vehicle before using Foam+Seal for the first time — on a cleanly degreased paint, the sealing polymers will deposit more evenly and with stronger adhesion than on a paint burdened with residues. Anyone who thoroughly degreases and cleans their vehicle before the first Foam+Seal application starts with an optimal basis for continuous protection. After just the first three to four washes with Foam+Seal, you will see the difference: a beading effect that builds up, water that drains off faster, and a paint that looks significantly fresher and cleaner after rain than before.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":49352717107535,"sku":"D1-SNX-251300","price":10.22,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-xtreme-foam-seal-autoshampoo-versiegelung_1000ml.png?v=1721676692"},{"product_id":"sonax-xtreme-foamgiant-shampoo-autoshampoo","title":"XTREME FoamGiant Shampoo Car Shampoo","description":"\u003ch2\u003eMaximum Foam Performance for a Thorough Car Wash — the SONAX XTREME FoamGiant\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes SONAX FoamGiant Shampoo special? The foam concentrate produces a giant, long-lasting foam blanket with strong dirt-dissolving power — pH-neutral, suitable for wraps and matte paints. 1 liter.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eFoam shampoos are an indispensable part of modern car washing — but not every foam concentrate delivers the foam performance needed for a truly thorough cleaning. Either the foam collapses too quickly, or the cleaning power is too weak with a gentle formula. The \u003cstrong\u003eSONAX XTREME FoamGiant\u003c\/strong\u003e combines both: a giant, extremely long-lasting foam blanket with the dirt-dissolving power that vehicles truly need after highway or city driving. The formula remains pH-neutral and gentle enough for wraps, matte paints, and freshly sealed surfaces. As a concentrated foam shampoo, it adapts to various application devices — from foam lances on pressure washers to hand-held foam sprayers — and consistently delivers dense results when properly dosed. If you've been dissatisfied with the foam results of your shampoo until now, you'll find a product here that has been specifically developed for maximum foam performance without compromising on cleaning effectiveness.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGiant foam blanket with long dwell time.\u003c\/strong\u003e The special foam formula of FoamGiant not only produces a lot of foam — the foam also stays where it's applied. Long-lasting foam means more dwell time: the dirt remains in contact with the cleaning agent longer and dissolves much more effectively than with watery foam that runs off after a few seconds. The result is a more thorough cleaning with less mechanical work.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003epH-neutral formula — safe for wraps, matte paint, and sealants.\u003c\/strong\u003e FoamGiant has not only been developed for conventionally painted vehicles. Its pH-neutral composition makes it compatible with all types of wraps, matte paints, and freshly applied ceramic coatings. Acidic or alkaline shampoos can degrade protective layers or attack wraps — FoamGiant cleans thoroughly without affecting existing protection systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlexible concentrate for foam lance and hand sprayer.\u003c\/strong\u003e The concentrate is optimized for use with a foam lance on a pressure washer, but also works with hand-held foam sprayers. The dosage can be adjusted to the device and the desired foam consistency — from fine-pored, creamy foam to coarse-pored quick foam. This flexibility makes FoamGiant a tool that adapts to your detailing setup, not the other way around.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For maximum foam performance, first add the concentrate to the foam lance container, then fill with water — not the other way around. This prevents premature foaming and gives you control over the concentration. With very hard water, a higher proportion of concentrate is worthwhile, as limescale can reduce foam stability. Apply the foam from top to bottom and let it dwell for at least 3–5 minutes before working the surface with a wash mitt. For matte paints and wraps: after rinsing, dry with a soft drying towel, do not rub.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003epH-neutral foam formula — how FoamGiant dissolves dirt without damaging surfaces\u003c\/h3\u003e\n\n\u003cp\u003eThe principle behind a pH-neutral foam shampoo is simpler than it sounds: A pH value of 7 (neutral) means that the product is neither acidic nor alkaline. This is crucial because most protective layers on vehicle paints — hard waxes, polymer sealants, ceramic coatings — are degraded by extreme pH values. An acidic shampoo (pH below 5) dissolves limescale and water spots, but also attacks sealants. An alkaline shampoo (pH above 9) cleans very aggressively, but can swell wraps and degrease paint surfaces. FoamGiant finds the middle ground: It cleans through surfactant action — the surfactants surround dirt particles and separate them from the surface without chemically interfering with the surface.\u003c\/p\u003e\n\n\u003cp\u003eThe difference from standard car shampoo lies in the foam formula. Conventional shampoos create foam when mixed with water and air, but the quality of this foam — stability, density, adhesion to the surface — depends heavily on the foaming agents used. FoamGiant uses a formula that has been deliberately optimized for maximum foam stability. This means: The foam remains as a compact blanket on the vehicle surface, does not immediately run off, and gives the surfactants enough time to bind dirt and road film. This extended dwell time is the key advantage over more liquid foam. At the same time, there are no aggressive solvents or acids in the formula that would be problematic for sensitive surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicles with wraps, pH neutrality is particularly relevant. PPF films are sensitive to solvent-based or very alkaline cleaners — the elastomer layer that provides self-healing properties can be permanently impaired by the wrong chemistry. So, if you have a wrapped vehicle and want to wash it regularly with a foam lance, you're much better off with a pH-neutral foam concentrate like FoamGiant than with a universal pressure washer shampoo from the hardware store. The formula is also free of components that would create unwanted gloss effects on matte paints and matte wraps — the matte finish is retained after washing.\u003c\/p\u003e\n\n\u003ch3\u003eCorrectly dosing and applying FoamGiant — the washing workflow with a foam lance\u003c\/h3\u003e\n\n\u003cp\u003eThe application of FoamGiant varies depending on the device. Most often, the product is used with a foam lance on a pressure washer: Here, 30–100 ml of concentrate are mixed with 1 liter of water and added to the lance container. The exact amount depends on the device, nozzle setting, and personal foam preference. Those who prefer creamy, dense foam will dose more generously — those who prefer a more fluid pre-foam application will use the lower dosage. With a hand-held foam sprayer (e.g., PROFILINE FoamSprayer), 10–30 ml per liter of water are recommended. The lower dosage is sufficient because the hand-held sprayer introduces less air into the mixture than an HD foam lance — the foam is softer and has a different texture.\u003c\/p\u003e\n\n\u003cp\u003eThe washing workflow ideally starts with a brief pre-rinse of the vehicle with clear water to rinse off loose coarse dirt and prevent sand particles from being worked into the surface when applying the foam. Then, the foam is sprayed from top to bottom — roof, hood, side panels, sills last. The dwell time of 3–5 minutes should not be undercut; for heavily soiled vehicles, the foam can remain on the surface longer. Important: The foam must not dry out. On hot summer days or in direct sunlight, the process should be faster or the vehicle should be washed in the shade, as dried-on shampoo can leave streaks and water spots. After the dwell time, manual washing with a wash mitt follows — the foam acts as a lubricant and protects the paint from micro-scratches from direct contact.\u003c\/p\u003e\n\n\u003cp\u003eA common mistake: Adding the concentrate directly to the foam sprayer without diluting. Undiluted concentrate can clog nozzles and does not produce better foam — on the contrary, the foam quality deteriorates if the ratio is not right. Always add water to the container first, then concentrate. This prevents premature foaming when filling and ensures an even mixture. After washing, rinse the container of the foam lance or sprayer briefly with clear water — this extends the life of the equipment and prevents residue in the tank.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of application — for which vehicles and surfaces FoamGiant is suitable\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX XTREME FoamGiant\u003c\/strong\u003e is suitable for almost all exterior surfaces of modern vehicles: painted surfaces in gloss and matte, wraps, chrome elements, glass, plastic exterior parts, and rims. The only limitation: For very heavily baked-on rust film deposits on rims or for stubborn tire deposits, a specialized cleaner is more effective — FoamGiant is a washing shampoo, not an intensive cleaner. It reliably removes road film, bird droppings (fresh), insect residues (fresh to slightly dried), and dust deposits. For heavy contamination such as baked-on tar, tree sap, or long-dried bird droppings, pre-treatment with a specialized remover is recommended before foam washing.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicles with active protective coatings — ceramic coatings, polymer sealants, or graphene — FoamGiant is ideal: It does not wash out the sealant but cleans gently over it. This is a significant difference from alkaline shampoos, which systematically degrade protective layers over time. So, if you have a high-quality sealant on your vehicle and want to maximize its lifespan, you should pay attention to pH neutrality when choosing a shampoo. FoamGiant is the right choice for exactly this application.\u003c\/p\u003e\n\n\u003cp\u003eEven for professional detailers who wash several vehicles daily, the 1-liter concentrate is economical: At a dosage of 50 ml per liter of water, one liter of concentrate yields 20 liters of foam mixture — enough for a large number of vehicles. The concentrate form reduces storage volume and makes the product more cost-effective to use than ready-to-use shampoos. Compared to some competitors in the professional segment, FoamGiant shows an excellent balance of foam quality and cleaning intensity without posing a safety risk to sensitive surfaces. This makes it a reliable everyday shampoo that you can rely on wash after wash. Particularly practical: The FoamGiant concentrate can be easily bought and stored in stock — the bottle takes up little space in the garage, and since the concentrate is used heavily diluted, a bottle lasts significantly longer than most ready-to-use shampoos. For regular washers — whether private detailers or professionals — this is a decisive cost advantage. In addition: A dense foam blanket protects against holograms and swirl marks during manual washing because it cushions the direct contact between the wash mitt and the paint surface. Anyone who pays attention to their paint quality when washing knows how important this mechanical protective function is — and FoamGiant reliably delivers it in every wash.\u003c\/p\u003e\n\n\u003ch3\u003eFoamGiant in comparison — how it differs from other foam shampoos\u003c\/h3\u003e\n\n\u003cp\u003eWithin the SONAX XTREME range, FoamGiant is clearly positioned as the product with a focus on maximum foam performance and dwell time. The \u003ca href=\"https:\/\/www.detailing1.de\/products\/sonax-xtreme-richfoam-shampoo-autoshampoo\"\u003eXTREME Rich-Foam Shampoo\u003c\/a\u003e is also a foam shampoo from the same line, but with a profile more geared towards hand washing: creamier foam, pleasant handling with the wash mitt, fragrance formula. If you primarily wash by hand and are looking for a sensorially pleasant product, the Rich-Foam is a good choice. However, if you regularly use a foam lance and want to get the maximum foam yield from the concentrate, FoamGiant is the more appropriate choice — it is explicitly optimized for the spray application workflow.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"https:\/\/www.detailing1.de\/products\/sonax-xtreme-ceramic-activeshampoo-autoshampoo\"\u003eXTREME Ceramic Active-Shampoo\u003c\/a\u003e complements the range for a different application: It contains a ceramic protective component that slightly renews the vehicle's protective layer with each wash. This is ideal for vehicles without professional sealing or as a nurturing supplement after an initial sealant. FoamGiant does not offer this sealing effect — it is purely a washing shampoo. If you want to build up a little protection on your car with every wash, you should consider the Ceramic Active-Shampoo. If, on the other hand, you need a strong foam for the pre-foaming step or as a main washing product, without interfering with the existing sealant, FoamGiant is the right choice.\u003c\/p\u003e\n\n\u003cp\u003eCompared to universal foam cleaners from general accessory stores, FoamGiant has the advantage of being specialized for car washing: The surfactants are matched to road grime, the formula is paint-safe, and the combination of foam quality and surface protection is designed for typical vehicle surfaces. Cheap universal cleaners can produce a similar amount of foam in the short term, but often have uncontrolled pH values and potential for damage to coatings and films.\u003c\/p\u003e\n\n\u003ch3\u003eBuying recommendation — for whom the SONAX XTREME FoamGiant is worthwhile\u003c\/h3\u003e\n\n\u003cp\u003eFoamGiant is the first choice for anyone who uses a foam lance or foam sprayer as an integral part of their washing workflow and is looking for a product with maximum foam performance. Especially those who wash their car twice a week or more — for example, after city driving or during pollen season — benefit most from a foam concentrate that does not stress the paint surface and any protective layers, even with frequent use. This applies equally to the ambitious private detailer with their own pressure washer and to the professional who processes several vehicles daily. Anyone who has a vehicle with a wrap, matte paint, or fresh ceramic coating and wants to wash it thoroughly regularly without endangering the protective layer will make a safe decision with FoamGiant.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to FoamGiant, the \u003ca href=\"https:\/\/www.detailing1.de\/products\/sonax-profiline-foamsprayer-schaumspruher\"\u003ePROFILINE FoamSprayer\u003c\/a\u003e is recommended for a complete foam washing workflow — the handy foam sprayer without a pressure washer, which is particularly suitable for quick refresh washes or for use on the go. In combination with the FoamGiant concentrate, a compact, powerful washing kit is created that does not require an external pressure source. For a complete detailing workflow, a wax or sealant shampoo is recommended as the final step after foam washing. FoamGiant is the solid foundation here: It cleans thoroughly, mechanically protects the paint with dense foam, and leaves the surface in optimal condition for all subsequent work. The 1-liter bottle lasts for many washes and offers excellent value for money for a specialized foam concentrate of this quality. Once you've washed with FoamGiant, you'll immediately see the difference from an ordinary car shampoo — and will hardly want to switch back.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57341846847823,"sku":"D1-SNX-02903000","price":11.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-xtreme-foamgiant-shampoo-autoshampoo_1000ml.png?v=1774730123"}],"url":"https:\/\/detailing1.eu\/en\/collections\/sonax-xtreme-waschen.oembed","provider":"Detailing1","version":"1.0","type":"link"}